DJI Mic 3 2-Person Compact Wireless Microphone System/Recorder for Camera & Smartphone

Buy DJI Mic 3 2-Person Compact Wireless Microphone System/Recorder for Camera & Smartphone Here are the features / benefits and specifications of the DJI Mic 3 2-Person Compact Wireless Microphone System / Recorder for Camera & Smartphone available to purchase online at Icon Cameras Key Features & Benefits Two clip-on transmitters (TX) one receiver (RX) setup: lets you record from two people simultaneously — good for interviews, streaming, dual-host podcasts. Transmitters double as backup recorders: each TX unit has built-in internal storage so if wireless fails or for safety, audio is still captured locally. Adaptive Gain Control: modes like Automatic (prevents clipping during loud / dynamic scenes) and Dynamic (better for steady, consistent mid-level dialogues) for balanced audio without manual fiddling. Voice Tone Presets & Noise Cancelling: three voice tone presets (Regular, Rich, Bright) two levels of noise cancellation to help cut ambient background or wind noise. Dual-Band Wireless (2.4 GHz & 5.8/5.x GHz) Bluetooth 5.4: helps avoid interference and maintain stable signal over longer distances. Long Range Transmission: up to approximately 400 m (≈ 1,312 ft) line-of-sight in ideal conditions. Large Onboard Storage: ~32 GB in each transmitter to allow long internal recordings (single file or dual file, 24-bit or 32-bit float) for safety / backup use. Good Battery Life & Charging Case: each TX runs ~8 hours (receiver ~10 hours) under normal conditions; the charging case extends system usage (all components) up to ~28 hours. Timecode Support: integrated timecode input/output for better sync with cameras and multi-camera workflows. Flexibility of Outputs: Receiver can connect to cameras (3.5 mm TRS), to smartphone / laptop via USB-C adapter; also supports monitoring output. Technical Specifications Category Specification / Feature System Configuration 2 × Clip-On Transmitter/Recorder Mics (TX) 1 × Receiver (RX) Charging Case Accessories (windscreens, adapters etc.) Wireless Technology / Modes Digital: 2.4 GHz & 5.8/5.x GHz (WiFi / SDR) Bluetooth 5.4; automatic band switching to mitigate interference. Max Operating / Transmission Range Line-of-sight: ~ 400 m (≈ 1,312 ft) Through obstacles: significantly reduced (~80 m / ~262 ft depending on interference / occlusion) Bit Depth / Audio Formats 24-bit or 32-bit float internal recording; both single-file and dual-file modes supported. Sample Rate / Frequency Response 48 kHz (standard for wireless audio) Frequency response: ~ 20 Hz to 20-24 kHz (depends on mode: lossless or encoded) Polar Pattern Omnidirectional on transmitters; built-in mic capsules, suited for general vocal capture. TX (Transmitter) Specs Dimensions: 28.77 × 28.34 × 16.35 mm (≈ 1.13 × 1.12 × 0.64 in) (with magnet) Weight: 16 g (≈ 0.56 oz) (with magnet) Battery Capacity / Type: ~ 137 mAh Li-ion; charging spec max ≈ 5 V; ~50 mins full charge; ~8 hours operation (without case, no extra features) RX (Receiver) Specs Dimensions: 53.85 × 28.69 × 22.00 mm (≈ 2.12 × 1.13 × 0.87 in) Weight: 25.1 g (≈ 0.89 oz) Battery / Operating Time: ~ 10 hours under similar conditions with both transmitters connected, receiver connected; charging time ~50 minutes Charging Case Specs Dimensions: 106.30 × 42.50 × 59.20 mm (≈ 4.19 × 1.67 × 2.33 in) Weight: 164.1 g (≈ 5.79 oz) (case only) Battery Capacity: 1,950 mAh It can recharge the TX RX components ~ 2.4 full times. Operating / Environmental Conditions Transmitter charging temp: ~5 °C to 45 °C (≈ 41-113 °F) Operating temp: −10 °C to 45 °C (≈ 14-113 °F) Max SPL / SNR / Noise Maximum Sound Pressure Level (SPL): ~126 dB SPL @ 1% THD; ~130 dB SPL @ 10% THD Signal-to-Noise Ratio: ~72 dB Equivalent Noise Level: ~22 dBA Microphone Sensitivity −36 ±1 dBV @ 1 kHz, 94 dB SPL on TX capsules.